RevoSupport Forum

RevoSupport Forum (http://forum.revosupport.com/index.php)
-   Nokia (http://forum.revosupport.com/forumdisplay.php?f=85)
-   -   tolong tolong master flasing nokia C2-03 pake usb sampai program cnt gagal (http://forum.revosupport.com/showthread.php?t=16976)

joy punk 6th May 2012 15:21

tolong tolong master flasing nokia C2-03 pake usb sampai program cnt gagal
 
MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN: C086E3AA
Using device: USB ROM and HTI, FW ver: 00.50, SN: 010030AD
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.70
Module ver: 1.0.0.20766(30-03-2012), Library ver: 1.0.0.14016(30-03-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.37
EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Processing file: rm702__06.97.mcusw
Downloading item CODE:rm702__06.97.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.360 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.375 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 2.453 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 31.234 s
Checksum verified (0xA701)
Processing file: rm702__06.97.ppm_x
Downloading item CUST:package_x.ppm_ebl_psi.fls, num block: 1, size: 5.29 MB
Erasing area 0x41DC0000-0x4230A0BA ...OK
Programming completed in 7.500 s
Checksum verified (0x872D)
Processing file: rm702__06.97_003.image_x_ctv_id_9l128
Downloading item CUST:package_x_ctv_id.image.fls, num block: 1, size: 14.50 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming ...
Task failed at (08000012)!!!
Last RX buffer: 00 00 00 00 00 00 00 00 00 00 00 00 CC 00 00 00 0A 00 00 00 25 00 00 00 51 75 61 6E 74 75 6D 5F 42 6F 6F 74 6C 6F 61 64 65 72 5F 31 30 2E 33 37 5F 4D 31 53 31 00 00 00 03 10 01 00 01 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 1F 00 00 00 00 00 00 00 00 00 00 00 02 08 00 00 02 00 00 00 98 45 80 60 40 45 80 60 01 00 00 00 0B 00 00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 06 FF FF 68 06 FF FF 00 00 00 00 01 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 01 00 01 00 00 00 00 00 00 00 00 C8 07 08 00 BC A0 30 42 00 00 00 00 00 08 00 00 00 00 4C 42 FE FF 95 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

aldep2009 6th May 2012 15:36

Quote:

Originally Posted by joy punk (Post 74532)
MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN: C086E3AA
Using device: USB ROM and HTI, FW ver: 00.50, SN: 010030AD
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.70
Module ver: 1.0.0.20766(30-03-2012), Library ver: 1.0.0.14016(30-03-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.37
EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Processing file: rm702__06.97.mcusw
Downloading item CODE:rm702__06.97.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.360 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.375 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 2.453 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 31.234 s
Checksum verified (0xA701)
Processing file: rm702__06.97.ppm_x
Downloading item CUST:package_x.ppm_ebl_psi.fls, num block: 1, size: 5.29 MB
Erasing area 0x41DC0000-0x4230A0BA ...OK
Programming completed in 7.500 s
Checksum verified (0x872D)
Processing file: rm702__06.97_003.image_x_ctv_id_9l128
Downloading item CUST:package_x_ctv_id.image.fls, num block: 1, size: 14.50 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming ...
Task failed at (08000012)!!!
Last RX buffer: 00 00 00 00 00 00 00 00 00 00 00 00 CC 00 00 00 0A 00 00 00 25 00 00 00 51 75 61 6E 74 75 6D 5F 42 6F 6F 74 6C 6F 61 64 65 72 5F 31 30 2E 33 37 5F 4D 31 53 31 00 00 00 03 10 01 00 01 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 1F 00 00 00 00 00 00 00 00 00 00 00 02 08 00 00 02 00 00 00 98 45 80 60 40 45 80 60 01 00 00 00 0B 00 00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 06 FF FF 68 06 FF FF 00 00 00 00 01 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 01 00 01 00 00 00 00 00 00 00 00 C8 07 08 00 BC A0 30 42 00 00 00 00 00 08 00 00 00 00 4C 42 FE FF 95 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


indikasi awal dari log di atas ic flash bermasalah.

namun sebelum ke hardware pastikan software sudah maksimal.
pake hwk, atau atf layak di coba.
pastikan versi paling tinggi.

jika sudah maksimal , pastikan tegangan untuk ic flash nya ok.
jika sudah semua , ic flash silah kan di eksekusi.
panasin dulu, goyang, atau reball.

jonysoeroto 6th May 2012 20:39

Coba pake hwk
Barbuk C2 03 HWK
Spoiler
Insert USB Cable to Switched OFF Phone and Power ON
IF_USB: XGOLD21x
IF_SBL: XGOLD213, Ok
IF_EBL: Quantum_Bootloader_10.46_M1S1 10.46, Mode: CC
FL_ID : 89008289, Intel 38F50xxLOY3 512Mb
MCU FLASH BUNDLE: D3D0F6B2_rm702__06.51.mcusw
Flash File: rm702__06.51.mcusw_ebl_psi.fls
Erase Area: 0x40000000 - 0x4001FFFE, Erased: 00:00
Write Area: 0x40000000 - 0x4001FFFE, Written: 00:00
Erase Area: 0x40040000 - 0x4005FFFE, Erased: 00:00
Write Area: 0x40040000 - 0x4005FFFE, Written: 00:00
Erase Area: 0x40060000 - 0x4015FFFE, Erased: 00:05
Write Area: 0x40060000 - 0x4015FFFE, Written: 00:01
Erase Area: 0x40280000 - 0x41DBFFFE, Erased: 02:15
Write Area: 0x40280000 - 0x41D3FFFE, Written: 00:38
Erase Area: 0x43E20000 - 0x43E5FFFE, Erased: 00:00
PPM FLASH BUNDLE: 8A1EA4F6_rm702__06.51.ppm_x
Flash File: package_x.ppm_ebl_psi.fls
Erase Area: 0x41DC0000 - 0x424BFFFE, Erased: 00:25
Write Area: 0x41DC0000 - 0x4230A1BE, Written: 00:07
CNT FLASH BUNDLE: 2410561C_rm702__06.51.image_x_059D469
Flash File: package_x_059D469.image.fls
Erase Area: 0x424C0000 - 0x43E1FFFE, Erased: 03:20
Write Area: 0x424C0000 - 0x42F7FFFE, Written: 00:15
Erase Area: 0x43E60000 - 0x43F3FFFE, Erased: 00:07
Flashing Done: 07:27
ShutDown Done

aldep2009 6th May 2012 21:04

Quote:

Originally Posted by jonysoeroto (Post 74577)
Coba pake hwk
Barbuk C2 03 HWK
Spoiler
Insert USB Cable to Switched OFF Phone and Power ON
IF_USB: XGOLD21x
IF_SBL: XGOLD213, Ok
IF_EBL: Quantum_Bootloader_10.46_M1S1 10.46, Mode: CC
FL_ID : 89008289, Intel 38F50xxLOY3 512Mb
MCU FLASH BUNDLE: D3D0F6B2_rm702__06.51.mcusw
Flash File: rm702__06.51.mcusw_ebl_psi.fls
Erase Area: 0x40000000 - 0x4001FFFE, Erased: 00:00
Write Area: 0x40000000 - 0x4001FFFE, Written: 00:00
Erase Area: 0x40040000 - 0x4005FFFE, Erased: 00:00
Write Area: 0x40040000 - 0x4005FFFE, Written: 00:00
Erase Area: 0x40060000 - 0x4015FFFE, Erased: 00:05
Write Area: 0x40060000 - 0x4015FFFE, Written: 00:01
Erase Area: 0x40280000 - 0x41DBFFFE, Erased: 02:15
Write Area: 0x40280000 - 0x41D3FFFE, Written: 00:38
Erase Area: 0x43E20000 - 0x43E5FFFE, Erased: 00:00
PPM FLASH BUNDLE: 8A1EA4F6_rm702__06.51.ppm_x
Flash File: package_x.ppm_ebl_psi.fls
Erase Area: 0x41DC0000 - 0x424BFFFE, Erased: 00:25
Write Area: 0x41DC0000 - 0x4230A1BE, Written: 00:07
CNT FLASH BUNDLE: 2410561C_rm702__06.51.image_x_059D469
Flash File: package_x_059D469.image.fls
Erase Area: 0x424C0000 - 0x43E1FFFE, Erased: 03:20
Write Area: 0x424C0000 - 0x42F7FFFE, Written: 00:15
Erase Area: 0x43E60000 - 0x43F3FFFE, Erased: 00:07
Flashing Done: 07:27
ShutDown Done


wess. mantap
cair dong...........


All times are GMT +8. The time now is 23:57.

Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.